|
Are the W-Series products capable of motion tracking?
Yes, With the optional LED’s, available in blue and red combinations, it is easy to track animal movement.
|
Can TBSI provide a different connector for a wireless headstage than the standard?
We have some flexibility as long as the connector can line up to the pins on our PCB. We would need a schematic of your connector to determine the answer.
|
What are the parameters of the output signal (peak-to-peak amplitude?
Max Output voltage is 2Vp-p, BW is .8Hz to 7Khz, and all outputs are AC-Coupled.
|
Which type of output connectors does TBSI use to interface the receiver with the A/D board?
We can provide a cable to connector the receiver’s dB 37 connector to the customers ADC board. Many options and cable lengths are available.
|
|
|
|
|
|
|
How many wires are use in an 210 channel environment?
The M-Series 210 channel system will have only 10 wires to provide great opportunities for neural experimentation at an affordable cost.
|
What is the input noise level for M-series headstages?
Input referred noise is 11uV per root hz. This is about 25uV rms noise.
|
Can amplifiers be used in a bipolar (differential) configuration?
There are only single ended amplifiers (not differential) however you can use 2 channels to record differential inputs. The common mode rejection ratio is ~-68db.
|
|
|
Is the T-Series 8 channel Gain 2 model equipped with a Bandpass filter?
No, but it is available for the G20, G100 and G1000.
|
|
|
Does the 16 channel tethered stimulator also record?
No, not at this time. However, it is something that TBSI is looking into for future production.
|
|
|